Credit Card.Paypal.TT.Escrow.Western Union
|1||Typical Capacity||6360mAh @ 0.2C Discharge|
|Minimum capacity||6060mah @ 0.2C Discharge|
|3||Charge||Max input voltage||26V±0.05|
|Max Charge voltage||16.8V±0.05|
|Standard charge current||1272mA|
|Max Charge current||6400mA|
|4||Discharge||Min Discharge voltage||12.0±0.10V (PCB End-of-charge Voltage)|
|Standard discharge current||0.2ItA 1272mA|
|Max continuous discharge current||6.36 1.0ItA|
|Discharge cut-off voltage||2.5V*n 10v|
|5||low voltage for discharge protection||10v|
|Initial Impedance||Max: 250mW|
|7||Operating temperature||Charging： 0℃~45℃
|8||Storage temperature||Within a months -5℃~35℃|
|Within 6 months -20～35℃|
|9||Storage Humidity||≤75% RH|
|10||Appearance||Without scratch, distortion, contamination and leakage|
|11||Standard environmental condition||Temperature ： 25±2℃
Humidity : 45-75%RH
Atmospheric Pressure ： 86-106 KPA
1.Q:Where can I get the price?
A:We usually quote within 24 hours after we get your inquiry.if you are very urgent to get the price,please call us or tell us in your inquiry priority.
2.Q:how can I get a sample to check your quality?
A:After price confirmation,you can require for samples to check our quality.
3.Q:What about the lead time for mass production?
A:It depends on your order quantity and the season you place the order.
4.Q:What is your team for payment?
A:We accept T/T,L/C,Paypal, Western Union,Money Gram,Ali Express,Cash,etc.
5.Q:What is accepted payment currency?
A:We accepted USD,EUR,CAD,AUD,HKD,GBP,JPY,NZD,SGD,CHF,THB,etc.
6.Q:If we went to test lithium polymer battery ,what testing requirement there are?
A:(1)battery test environment；
(2)Measuring instrumentation requirements
Voltage instrumentation requirements--Measuring the voltage meter accuracy no less than 0.5 magnitude;
Current instrumentation requirements--Measuring the current meter accuracy no less than 0.5 magnitude;
Time instrumentation requirements--Measuring the time meter accuracy no less than 0.1%;
Temperature instrumentation requirements--Measuring the temperature mater accuracy no less than 0.5℃
Impedance instrumentation requirement--Measuring impedance should by sinusoidal alternating(1 KHZ)test.
7.Q:What is full charged?
A:With charging voltage 4.2v,current 0.2C continued to charge the battery pack ,when charging current drops to 0.02C charging is terminated,shall be full charged.
8.Q:What is full discharged?
A :Standard discharge current 0.2C for continuous discharge is terminated,shall be full discharged.
May you like
Leave a message
Welcome to visit our website. If there is anything we can do for you, please contact with the online service or leave your message here. We will reply you as soon as possible.